SKIMCOAT RAYCO SUPERFINE WHITE 20KG
TGC Auto Parts

SKIMCOAT RAYCO SUPERFINE WHITE 20KG

₱350.00 Pre-order stocks Sold out
Pre-order stocks.
CODE: 1086541

1-4 DAYS DELIVERY

100% ORIGINAL AND QUALITY

24 MONTHS GUARANTEE

RAYCO SUPERFINE SKIMCOAT is a finishing cementitious, thin plastering mortar formulated for interior and exterior application for concrete surface and pre-casts. SKIMCOAT is a one product that is easy to apply and exhibits excellent properties. It also reduces construction costs by replacing three applications – concrete neutralizer, patching compound and flat latex as primer. It is used to even surfaces up to 0 – 3mm thick to face up most types of masonry.

PRODUCT FEATURES:

  • Excellent bond to the concrete substrate
  • Excellent non-sag properties that give good workability on both vertical and overhead applications
  • No chalking, cracking or flaking
  • Long term durability

RECOMMENDATION:

  • Thin plastering
  • Filling pinholes prior to over coating
  • Interior and Exterior

PRODUCT DATA:

Color: White and Gray

Coverage: 20m2 per bag at 1mm thickness.

Coverage figures are theoretical and due to wastage factors and the nature of possible substrates, practical coverage will be reduced.

Working Time: Approximately 1-hour

Packaging: 20 kg bag

Storage: Store in a cool, dry place, away from direct sunlight.

Shelf Life : 12 months from manufacturing date.

 

SURFACE PREPARATION: 

  • All surfaces must be smooth, sound and free from debris. Surfaces must be free from oil contamination.
  • Concrete surfaces must be free from any trace of release oils and curing compound. Prior to application, wet substrate well with clean water especially for outdoor application & during extreme hot weather conditions.
  • Apply the mixed Skimcoat using a steel trowel. Thin skim coating will dry in about 30– 45 minutes depending on temperature and porosity of substrate. Smoothen the skim coat with soft paint brush or troweled.

    Note: No further addition of water to unused plaster is required. Skimcoat may be over coated with a decorative coating after 48 hours depending on the ambient condition.

    MIXING:

    • Using a plastic container, place 7-8 liters of clean water in the container and add 20 kg of Skimcoat.
    • Mix thoroughly using a slow speed electric drill fitted with paddle for 3 – 5 minutes until desired homogeneous paste is achieved.
    • Depending on the ambient temperature and the desired consistency, the amount of water required may vary slightly but should not exceed 8.0 liters per 20 kg bag of Supremo Skimcoat.
    • Always add powder to water.

      Customer Reviews

      Based on 9 reviews
      100%
      (9)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      T
      TANRY PAINT CENTER
      Very Nice

      flawless finish, mas makapit sa substrate!

      P
      PYW TRADING

      SKIMCOAT RAYCO SUPERFINE WHITE 20KG

      Y
      YOIDESU PAINTS

      SKIMCOAT RAYCO SUPERFINE WHITE 20KG

      B
      BONANZAPAINT SHOP

      SKIMCOAT RAYCO SUPERFINE WHITE 20KG

      G
      GES PAINT

      SKIMCOAT RAYCO SUPERFINE WHITE 20KG

      Recently Viewed